PRODUCTS

  • home
  • PRODUCTS
  • K-CUT

CUTTABLE HEAT TRANSFER VINYL

K-CUT

GLOW IN THE DARK

Adds that ‘something special’ to your costumes and special event wear. Has the look of normal film during the daytime and at night it provides a luminous, long-lasting glow.

  • Yellow only
  • High wash resistance
  • Catches the light and glows under dark conditions

WE RECOMMEND THE FOLLOWING
CONDITIONS TO ACHIEVE THE BEST RESULTS WE

  • Temperature

    150℃
  • Pressure

    34psi
  • Time

    10sec
  • Peel Type

    Warm peel
  • Washing

    machine and handwash only

RECOMMENDED FABRICS

COTTON,POLYESTER,POLY/COTTON BLENDS

CUTTING GUIDELINES *If you have dIFferent kinds of cutting machine, you should always test cut prior to any production run.

PLOTTER BLADE FORCE OFFSET SPEED DEPTH
ROLAND GS-24 45º 130~160 g/f 0.250mm 15cm/sec 0.3~0.5mm

COLOR CHART

HOW TO USE

  • SET MATERIAL

    Feed the material into the plotter machine hotmelt side facing up.
  • CUTTING

    Select an existing design or create yo ur own on the computer (NB : Design must be mirrored.)
    Change the machine settings according to the material's conditions (If nsure, see the PDF provided above.)
  • WEEDING

    On a flat surface take a weeder and remove any parts not necessary for your design.
  • PREHEAT & POSITION

    The ideal heating, pressure and time conditions for press can be seen in the photo above.
  • HEAT APPLY

    Preheat the garment and arrange the weeded design in your desired placement and then press.
  • PEEL OFF CARRIER

    Gently remove PET film from the top side of the design.