PRODUCTS

  • home
  • PRODUCTS
  • K-CUT

CUTTABLE HEAT TRANSFER VINYL

K-CUT

PVC

Our best-selling product, PVC is a matte finish, material based heat transfer film.
Suitable for monochrome lettering, numbering and figures. PVC is especially easy to use with basic designs.

  • Smooth application
  • Economical and durable
  • Easy to cut and weed
  • Vibrant colours
  • Matte/Glossy finish available

WE RECOMMEND THE FOLLOWING
CONDITIONS TO ACHIEVE THE BEST RESULTS WE

  • Temperature

    150℃

  • Pressure

    34psi

  • Time

    10sec

  • Peel Type

    Cool peel

  • Washing

    machine and handwash only

RECOMMENDED FABRICS

COTTON,POLYESTER,POLY/COTTON BLENDS

CUTTING GUIDELINES *If you have dIFferent kinds of cutting machine, you should always test cut prior to any production run.

PLOTTER BLADE FORCE OFFSET SPEED DEPTH
ROLAND GS-24 45º 120~180 g/f 0.250mm 15cm/sec 0.2~0.4mm

COLOR CHART

HOW TO USE

  • SET MATERIAL

    Feed the material into the plotter machine hotmelt side facing up.

  • CUTTING

    Select an existing design or create yo ur own on the computer (NB : Design must be mirrored.)
    Change the machine settings according to the material's conditions (If nsure, see the PDF provided above.)

  • WEEDING

    On a flat surface take a weeder and remove any parts not necessary for your design.

  • PREHEAT & POSITION

    The ideal heating, pressure and time conditions for press can be seen in the photo above.

  • HEAT APPLY

    Preheat the garment and arrange the weeded design in your desired placement and then press.

  • PEEL OFF CARRIER

    Gently remove PET film from the top side of the design.